LE
SNOWBOARD 420 2024
Attention: cet item est en vente finale. Aucun retour ni remboursement.
Description anglaise fournie par le manufacturier:
OFTEN COPIED, NEVER DUPLICATED.
The board that changed the way we look at snowboards.
Length is no longer the only way to stay above powder. This board is all about surface area displacement to create float and stability in a package that has much less swing-weight due to its dramatically shortened length. A tight turning radius facilitates tree-bound powder hunts, and a custom crafted rocker line keeps the nose up at any speed. Often copied, but never duplicated, there’s only one 420.
420 TECH
OUTLINE
RADIAL
Radial: When basics are good. A radial outline is how the classic snowboards were made. Where you have the radius that draws a single circle. It’s the most basic way to turn, it will allow you to carve and hold an edge throughout your arc.
CORE
POPLAR/PAULOWNIA
Designed specifically for the 420 and 20/20.
The weightless core strikes a critical balance between lightweight and strength. Using a lower density species of Poplar in areas that are not as structural and Paulownia in the areas that are, we’re able to shave precious weight off our beloved 420 and now the 20/20. This helps a board not only float, but “feel” floaty.
BASE PROFILE
BLENDED ROCKER + CAMBER
BASE MATERIALS
SINTERED TRUE
This is the term we use and is the grey zone many companies play in. We call it Sintered Spec because it’s hardness and chemical properties are very close to true sintered and it’s on-snow performance is also very close to true sintered - but it’s formed using the extrusion process. How? – Well the raw material is actually pre-consumer recycled (meaning it never left the factory) sintered base material. So while the heating and extrusion process has softened it slightly, it’s still much harder than true Extruded.
420 SPECS
| Board Length (cm) | 141 | 145 | 148 | 152 |
|---|---|---|---|---|
| Surface Area (dm2) | 35,2 | 38,4 | 43 | 44,3 |
| Tip Length (cm) | 36,1 | 36,5 | 36,5 | 38 |
| Tail Length (cm) | 23,6 | 24 | 24 | 24,5 |
| Effective Edge Length (cm) | 98,8 | 102 | 105,1 | 107,5 |
| Contact Length (cm) | 81,3 | 84,5 | 87,5 | 89,5 |
| Waist Width (cm) | 25,6 | 26 | 28,6 | 28,6 |
| Front Foot Width (cm) | 27 | 27,4 | 30,1 | 30,4 |
| Rear Foot Width (cm) | 26,4 | 26,8 | 29,5 | 29,6 |
| Tip Width (cm) | 30,6 | 30,9 | 33,8 | 34 |
| Tail Width (cm) | 29 | 29,4 | 32,2 | 32,1 |
| Taper (cm) | 1,6 | 1,6 | 1,6 | 1,8 |
| Rocker / Camber (mm) | C0.2 | C0.2 | C0.4 | C0.4 |
| Sidecut (m) | 5,7 | 5,9 | 6 | 6,1 |
| Ref. Point (cm) | 49,5 | 49,5 | 53,3 | 57,2 |
| Ref. Point (in) | 19,5 | 19,5 | 21 | 22,5 |
| Ref. Stance Setback (mm) | 1,5 | 1,5 | 1,5 | 1,5 |
| Min Ref. Stance Width (cm) | 45,5 | 45,5 | 49,3 | 53,2 |
| Min Ref. Stance Width (in) | 17,9 | 17,9 | 19,4 | 20,9 |
| Max Ref. Stance Width (cm) | 53,5 | 53,5 | 57,3 | 61,2 |
| Max Ref. Stance Width (in) | 21,1 | 21,1 | 22,6 | 24,1 |
| Rider Weight (lbs) | 90-110 | 110-160 | 120-160 | 150-200 |
| Rider Weight (kg) | 41-50 | 50-72 | 54-72 | 68-91 |